VENTRIA 3-Flügel


The reliable system flap for SHEV systems and ventilation

The new VENTRIA 3 system flap (patent pending) made of high-quality aluminium profiles can be utilised as a reliable smoke and heat exhaust device or for daily ventilation depending on its design. The circumferential thermal separation as well as the optimised chamber and web design of the framework and flap profile promise excellent thermal insulation.

Apart from that, the VENTRIA 3 impresses with its elegant design and rounded shapes. Due to the generous variety of available models, the flap are also extremely adaptable and flexible. The actuation can be executed on request as electrically (24V or 230V) or pneumatically.

Depending on function and glazing, flap surface areas of up to 6.0 m2 are possible. This therefore enables you to guarantee optimum room air with simultaneously very good thermal insulation values of Uw = 1.2 W/m2K in the closed status. Due to its excellent product characteristics, the VENTRIA 3 has been awarded the comprehensive environmental product declaration (EPD) according to ISO 14025 and EN 15804.

  • Can be utilised as tilt flap, folding flap or rotating flap
  • For roof slopes from 0° to 90°
  • Possible as single or double flap
  • Air permeability class according to EN 12207:1999-11 – Class 4
  • Driving rain water tightness according to EN 12208:1999-11 – Class E1950
  • Resistance to wind load according to EN 12210:1999-11 – Class C5/B5
  • Function tested in a cold chamber to -25°C
  • With chain thrust motors still function capable after fire test
  • Maximum width of up to 3,000 mm
  • Maximum length of up to 3,000 mm
  • Maximum flap surface area of up to 6.0 m² (ventilation)
  • Filling weights up to 75 kg/m2
  • Elevation width of 104 mm
  • Opening angle up to 90° possible
  • Uw Value = 1.2 W/m2K (reference value)
  • Pneumatic or electric drive (24V and 230V)
  • Administration buildings
  • Municipal buildings
  • Industrial buildings
  • Residential buildings