JET-GFK-Aufsetzkranz mit TRP-Seitenabkantung

JET-GRP upstand with TRP edge chamfer

The classic upstand for flat metal roofs


The JET-GRP upstand with TRP edge chamfer is the perfect solution for installation on all profiled roof upper coverings (double skinned and thermal/insulated roofs) as well as corrugated profile roofs and standing seam systems.


These enable you to create variable flange widths - matching the bead spacing in the width. The upper and lower flange width is usually 300 mm each or will be adapted to your individual requirements. Circumferential edge chamfers are also possible. U-Values of up to 0.94W/m2K are achieved due to the reveal with laminated PUR thermal insulation.


If required, the JET-GRP upstand upstand with TRP edge chamfer can be used for SHEV systems with the various FIREJET® opener devices - tested according to EN 12101-2. Due to the RAL coating, you can also adapt the appearance of these upstands to your personal requirements. The standard colour coating is RAL 9010.

  • GRP upstand (1-part) with 20 mm PU insulation (standard) optional 40, 60, 80 and 100 mm PU insulation available
  • Surfaces: RAL 9010
  • Can be used for SHEV systems with the various FIREJET® opener devices - tested according to EN 12101-2
  • Can be used for staircase SHEV devices in accordance with LBO with various 24V electric drives and SHEV control centres
  • Deliverable in the nominal dimensions 60 x 60 / 50 x 100 cm to 250 x 250 cm / 200 x 300 cm
  • Deliverable in the upstand heights: 15, 30 and 50 cm (RAK 30 cm)
  • Un Upstand Value (for the upstand height 30 cm): 0.43 to 1.09 W/m2K according to EN 673 / DIN 4108-4
  • Uup Value (for the upstand height 30 cm): 0.55 W/m2K to 1.21 W/m2K according to EN 1873
  • GRP upstand: (GRP / PU insulation / GRP)
  • Fire class: E according to EN 13501-1
  • Industrial buildings
  • Commercial buildings
  • Office buildings
  • Administration buildings

Downloads

Downloads