JET EKS-Klappe

JET Continuous Rooflight Single Flap

Single flap for saddle continuous rooflights for ventilation and as SHEV

There are JET continuous rooflight single flaps (EKS) with an SHEV opening angle of 65° available especially for use in JET-VARIO-THERM-S continuous rooflights.

These flaps can be utilised both for smoke exhaust in case of fire (SHEV) as well as for daily ventilation. Depending on which, either toxic gases and smoke are removed or the exchange of air, in which warm, stale air rises to the top and is routed outside via the flaps, is made possible. The devices are tested and certified according to DIN EN 12101-2 for utilisation as SHEV.

The corresponding additional devices are integrated for use as ventilation flaps. The ventilation options are actuated as either electrically or pneumatically and, with additional accessories such as wind/rain alarm devices or central closing control system with timer, provide special comfort for you.

  • Versatile glazing options (such as fixed continuous rooflight)
  • Electric drive units for daily aeration and ventilation
  • Can be utilised as SHEV devices with the VARIO-FIREJET® 65J opener device systems
  • Tested and certified according to DIN EN 12101-2
  • Deliverable in nominal dimensions from 103 x 100cm up to 250 x 204cm
  • Installation slope from 10° to 90°
  • Depending on selected multi-wall sheet
    • Ug Values from 1.8 to 1.2 W/m2K
  • Light transmission TL between 64 and 26 %
  • SHEV characteristics depending on dimension
  • Industrial buildings
  • Commercial buildings